Accessories for stretch ceilings
Light diffusers for stretch ceiling profiles
A light diffuser closes the LED groove in the profile and spreads the strip light along the stretch ceiling line. Polycarbonate DIFFUSY follows LIGHTRA and CURTINA X406 widths. PVC INSERTA Y015, Y015 F and Y030 fit light lines, height steps and FLOATIA X302/X303. Linear slot diffusers for air sit under Ventilation.
DIFFUSY Y108
7.78 EUR
DIFFUSY Y114
1.56 EUR
DIFFUSY Y130
From 2.08 EUR
DIFFUSY Y134
2.59 EUR
DIFFUSY Y150
3.11 EUR
INSERTA Y015
0.83 EUR
INSERTA Y015 F
1.56 EUR
INSERTA Y030
1.56 EUR
Inserts for stretch ceiling profiles
Inserts close the visible harpoon groove, the cut edge or the wall line after install. Y001 fits CLASSIX X130, X101 and CONTURA X601. Y002 protects the membrane on sawn profile ends. Y008 is the decorative insert in the groove. Light diffusers for LED sit under Light diffusers.
End caps for stretch ceiling profiles
End caps close open profile ends and keep geometry at the joint. Fit follows the profile: Y series and colours match that model. Open the matching end cap or the profile product page.
ENDCAPP Y201
1.04 EUR
ENDCAPP Y202
1.04 EUR
ENDCAPP Y203
1.04 EUR
ENDCAPP Y204
1.04 EUR
ENDCAPP Y205
5.19 EUR
ENDCAPP Y206
2.08 EUR
ENDCAPP Y207
2.08 EUR
ENDCAPP Y208
5.19 EUR
ENDCAPP Y209
12.97 EUR
ENDCAPP Y210
14.27 EUR
ENDCAPP Y211
27.24 EUR
ENDCAPP Y212
22.05 EUR
ENDCAPP Y213
ENDCAPP Y214
ENDCAPP Y215
3.37 EUR
Hooks and gliders for curtain tracks
Hooks and gliders run in the curtain-niche rail. HOOKARA Y701 is the roller hook, SLIDENE Y702 and Y703 are gliders, HOOKEND Y704 holds them before the exit opening. The niche profile itself is under curtain profiles.
HOOKARA Y701
4.15 EUR
HOOKEND Y704
0.52 EUR
SLIDENE Y702
12.45 EUR
SLIDENE Y703
0.67 EUR
Connectors for stretch ceiling profiles
Straight and angle JOINTEK connectors join profile sections and keep alignment. Y603/Y604 fit LUMNOVA Z008, TISSURE Z401 and UNITEXA Z701. Y605/Y606 fit MAGTRAK X508, TISSURE Z405 and VOLTIVA Z501. Not welded NX corners.
JOINTEK Y603
5.19 EUR
JOINTEK Y604
5.19 EUR
JOINTEK Y605
10.38 EUR
JOINTEK Y606
10.38 EUR
Installation tools for stretch ceilings
Tools for harpoon and membrane: SPATULA spatulas to insert, PRASEKA punch for the curtain track, STABILE saw guides and STUSLON mitre tools for diffuser and profile cuts. Not spare parts for profiles.
PRASEKA Y805
67.45 EUR
SPATULA Y801
23.09 EUR
SPATULA Y802
23.09 EUR
SPATULA Y803
23.09 EUR
SPATULA Y804
54.48 EUR
STABILE Y904
10.38 EUR
STABILE Y905
10.38 EUR
STABILE Y906
10.38 EUR
STUSLON Y901
1.83 EUR
STUSLON Y902
2.08 EUR
STUSLON Y903
1.82 EUR
Brackets for stretch ceilings
ANGLOVA Y401 is a galvanised-steel ceiling bracket. It carries the profile on the soffit with self-drilling screws. Do not confuse it with welded series corners under ready-made corners.
ANGLOVA Y401
0.42 EUR
AEROOOM Y911 spigot for slot diffusers
The connection spigot AEROOOM Y911 connects the slot diffusers AEROOOM, AERROLL and INVISIA X207 to a 110 × 55 mm flat duct and works for both supply and extract air. A Ø100 mm round duct is connected via a standard 110 × 55 / Ø100 mm adapter. The slot diffusers themselves are in the ventilation section.
AEROOOM Y911
15.57 EUR
Clips for stretch ceiling profiles
LOCKIUM Y301 is the clip that holds the membrane in a clip-in profile – PVC and fabric without a harpoon. It snaps into the groove. The profile range is under clip-in profiles; LUMNOVA is the light line, not this clip.
LOCKIUM Y301
1.56 EUR
BANDURA mounting profile for stretch ceiling systems
BANDURA X801 is the mounting profile in accessories. At a joint it connects two profiles; on a curve it holds their shape. It is fastened with self-tapping screws to those profiles. It is not a light line and not a shadow gap profile – those sit in their own shelves.
BANDURA X801
0.83 EUR
Samples for stretch ceilings
Sample boxes with Alumineu materials and colours for choosing finishes on site.
PROBKI
5.19 EUR
Frequently asked questions
How do I pick the right accessory?
By subgroup: end caps, diffusers, connectors, clips, hooks, tools, bracket, mounting profile or connection spigot. Each product page states which profile it fits.
Is one end cap universal?
No. ENDCAPP is model-specific. The Y series follows the profile – for example Y201 with LIGHTRA X015.
What is the Y911 spigot for?
It links the AEROOOM, AERROLL and INVISIA X207 slot diffusers to the flat duct. You do not need it for a light line.